12'' ×2 Double Convoluted Flange Rubber Air Spring For Lifting Jack
Specifications and Detailed Technical Parameters: 2B12×2
| OEM Reference | 12''×2; 12×2 |
| Nut/Teeth/Blind Nut | 12pcs |
| Material | Rubber and Flange |
| Bumper block | Without |
| Belt Loop/Girdle Hoop/Girdel Ring | One piece of belt loop/girdle hoop/girdle ring |
About Rubber Air Spring
Air spring is a sealed container filled with compressed air, using the compressibility of gas to achieve its elastic effect. Commonly known as air bag, air bag cylinder, cylinder and so on. It is a double convoluted air - bag spring. It consists of a rubber air bag with cord and compressed air enclosed in it. The inner layer of the airbag is made of air-tight rubber, while the outer layer is made of oil-resistant rubber. A steel waist ring between the joints prevents radial expansion of the middle part and prevents friction between the two joints. In addition to the two, there are single, three and four convoluted air springs. The more nodes, the better the elasticity.
Guangzhou Guomat air spring Co., Ltd have experienced in producing air spring since 2008, especially in industrial air springs. If you have any requirements, please feel free to contatc us.
The benefits of air spring for jacks are mainly reflected in the following aspects
1. Routine maintenance
In terms of daily maintenance, due to the working process of the mechanical jack is closely connected with the rotation of the screw, mechanical jack need to periodically check the maintenance, albeit in when not in use, if you don't pay attention to the lubrication rust mechanical jack, it is easy to cause the screw rust, produce a lot of rust, stuck screw, even cause irreversible damage. And the air bag jack almost does not need any routine maintenance work, when not in use, just need to put the air bag in a cool and dry environment can be static.
2. Environment
Mechanical jack because of exposed thread, compact structure, the surface has more lubricating oil, in use, if the environment is more dusty sand, it is easy to stick to the screw of the mechanical jack, damage the equipment. And the air bag jack because of its good integrity, smooth and dry surface, can well avoid this problem.
3. Load-bearing capacity
The general bearing capacity of the air bag jack is about 3 tons or so, customized up to 15 tons or so, although not as good as the lifting capacity of the mechanical jack outstanding, but also enough to cope with most of the actual situation.
4. Initial height requirements
If mechanical jacks are used, a larger starting height is required, while airbag jacks do not require such a large starting height.
The related picture of 2B12×2 air spring/air balloon/air ride spring/ air suspension
|
|
12'' ×2 Double Convoluted Flange Rubber Air Spring For Lifting Jack Images
|
