Triangle 6332 4426 Rubber Double Convoluted Indusutrial Air Apring For Vibration Table
Cross OEM NO.
Triangle 6332
Triangle 4426
Firestone W01-358-6943
Firestone W01 358 6943
Firestone W013586943
Contitech FD200 25 426
Contitech FD 200-25 426
Contitech FD200 25 426
Contitech 161332
Goodyear 2B9-250
Goodyear 2B9 250
Goodyear 578923206
Watson&Chalin AS-0041
Neway/SAF 90557237
Ridewell 1003586943C
Tuthill 6352
V-Steer II (Lift Bag)
Van Raden
2B6943 Specifications and Tecnical Data
Nut/blind nut
Top plate screw (nut) teeth: 2 x 1/2-13UNC
The screw center distance of the top cover plate: 89 mm
Screw (nut) teeth of the bottom cover plate: 2 x 3/8-16UNC
Screw center distance of bottom cover plate: 89mm
Air hole/air inlet/air fitting
Air hole/air inlet: 1/4NPT
Center distance between air inlet and nut: 44.5 mm
cover plate
Top plate diameter (width): 160 mm
Diameter of bottom cover (width): 160 mm
Maximum height: 325mm
Minimum height: 79mm
Working stroke: minimum79 mm to maximum 325 mm
others
Bumper block/bumper block: No bumper
Belt loop/Belt loop: one piece
Min. pressure: 0 bar
Return force to min.height: ≤250N
Overall weight with clamped plates: 3.5kg
Vibration isolation - dynamic characteristic values
Design Height H: recommended 254mm, minimum 230mm
| Pressure p[bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force(Load) [KN] | 6.0 | 8.1 | 10.2 | 12.3 | 14.4 | 16.5 | 8.6 |
| Spring rate [N/cm] | 730 | 930 | 1200 | 1390 | 1660 | 1840 |
| Natural frequency [Hz] | 1.8 | 1.8 | 1.7 | 1.7 | 1.7 | 1.7 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] |
| Height H[mm] | 290 | 4.1 | 5.6 | 7.3 | 9.0 | 10.5 | 12.4 | 9.4 |
| 260 | 5.6 | 7.3 | 9.4 | 11.3 | 13.4 | 15.4 | 8.9 |
| 230 | 6.6 | 8.8 | 11.1 | 13.4 | 15.8 | 18.1 | 8.4 |
| 200 | 7.5 | 9.9 | 12.5 | 15.0 | 17.6 | 20.2 | 7.7 |
| 170 | 8.3 | 11.0 | 13.8 | 16.6 | 19.4 | 22.2 | 7.0 |
| 140 | 8.9 | 11.8 | 14.8 | 17.7 | 20.7 | 23.6 | 6.1 |
| 110 | 9.3 | 12.3 | 15.6 | 18.7 | 21.9 | 24.6 | 5.1 |
Other Types of Triangle Air Spring/Air Shocks
| 6374/4474 | 6316/4327 | 6316/4364 |
| 6374/4468 | 6316/4343 | 6332/4427 |
| 6374/4467 | 6316/4334 | 6332/4463 |
| 6325/4504 | 6316/4363 | 6332/4429 |
| 6325/4505 | 6329/4321 | 6332/4507 |
| 6325/4362 | 6328/4371 | 6332/4511 |
| 6325/4320 | 6375/4514 | 6316/4363 |
| 6325/4504 | 6375/4480 | 6316/4472 |
| 6325/4450 | 6312 | 6316/4471 |
| 6325/4448 | 6412/4543 | 6316/4500 |
| 6325/4506 | 6412/4530 | 6316/4313 |
| 6325/4510 | 6392/4509 | 6316/4334 |
| 6395/4524 | 6364/4546 | 6316/4346 |
| 6325/4315 | 4757/4703 | 6334/4469 |
| 6392/4509 | 6334/4520 | 6334/4466 |
| 6392/4509 | 6334/4430 | 6334/4432 |
| 6332/4427 | 6334/4431 | 6319/4336 |
| 6332/4454 | 6334/4432 | 6316/4368 |
| 6332/4453 | 6334/4433 | 6316/4331 |
| 6316/4367 | 6316/4366 | 6316/4365 |
Air Spring Used In Vibration Table
It is very common to use air springs on a tap table on a resin processing line. The vibrating table works in the state of high frequency and low amplitude. In addition to absorbing high-frequency vibration and sound insulation, the air spring also has the function of lifting and changing. And according to the effective weight of the vibration table, the number of air springs can be changed. Provide reliable interchangeability and versatility on the series equipment of the vibrating table, and also optimize the structural design.
The image
|
|
Triangle 6332 4426 Rubber Double Convoluted Indusutrial Air Apring For Vibration Table Images
|
